The STI-9400 Laptop Signal Measurement & Analysis System
From measurement to report, it's the most complete, cost-effective, and easy-to-use laptop signal analysis system on the market. Now you can analyze RF signal coverage completely, get real time results, and even print your reports while in the field. The STI-9400 series systems incorporate a 1MHz to 1GHz scanning receiver and GPS to fully automate drive test measurement, analysis and report of RF signal coverage across geography. Critical for New Site Setup, Proof of Performance and Ongoing System Maintenance, the STI-9400 quickly and cost effectively translates large amounts of signal measurement data into clear concise reports.
While conducting drive-tests the position of historical measurements, the current position of the vehicle and the street map of the area are displayed in real time (above left). The latest measurement results for all the frequencies measured are also displayed during the drive-test. At any point the operator can stop measurements and create a coverage map from the measured data. This is a good way to identify signal anomalies which require more measurement detail while the test vehicle is still in the area.
The STI-9450 Signal Measurement & Analysis Kit
The STI-9450 is essentially the same scanning receiver and GPS based signal measurement and analysis system as the STI-9400, except you supply the laptop computer. The STI-9450 includes: STI Field Test 7 software, a GPS and scanning receiver 1MHz to 1GHz contained within mounting hardware, a magnetic mount GPS antenna and street map data for the entire USA.
STI Field Test 7 Software only $8,500 with selected instrument drivers
The STI Field Test 7 software package is integrated into the more complete solutions above or it can be used to automate an RF instrument that you may already own. The newest interface developments available for STI Field Test 7 are for the Aeroflex / IFR 3500A and 3920 radio test sets. (This software package is also available through Aeroflex Part AC25081). STI offers interface/drivers for many Agilent instruments as well including the ESA 44XX series, and HP 85XX series spectrum analyzers. STI Field Test 7 interfaces can also be supplied for the handheld Anritsu spectrum analyzers; the S412D, MS27XX B, D and E series instruments as well as the combination instruments that incorporate them. STI Field Test 7 can be used with these and other instruments to make signal measurements on multiple frequencies during drive-tests. Mobile radios can also be interfaced to make P-25 BER measurements, or analog voice Audio Quality Tests. Field Test 7 comes complete with a GPS Receiver and street map data for the entire US. International street data can be displayed with the MapInfo Corp. TAB file interface
Copyright 2010 (c) Survey Technologies,Inc. All rights reserved.
